Mine country in eastern parts of Värmland.
Stoll means a horisontal mine shaft, for the time being closed due to risk of collapse. All hope abandon, ye that enter here!
Scanned print
July 28, 2017
Mamiya 645 ProTL, Mamiya-Sekor 35mm/f3.5 lens
Adox CMS20 exp. @ iso10, developed in Adotech II, 10 min @ 20°C
Fomabrom Variant 111 in Paterson Acugrade FX-31
Untoned
Tags: meoptaopemus5
© All Rights Reserved
Scanned lith print.
M645 ProTL w/ M-S 45 mm/f2.8N. Sept 2021.
Fomapan 200 in HC-110.
Lith printed on Bergger Prestige FB glossy. Moersch Easy Lith 25+25+300OB+H2O to 1000 ml @ 40°C. Feb 2022.
Toned in Se 1+4, 30 sec.
PS borders.
© All Rights Reserved
Scanned Kallitype print
Digital negative
Hahnemühle Platinum Rag 8x10" exposed for 2,5 min in UV-box, developed in Sodium Citrate, cleared in Citric Acid and fixed in Hypo.
Testing adjustments of the curve to avoid burned out highlights. Resulted in decreased contrast...
But good detail and pleasing tone with this "sepia-developer" :-)
Untoned
White PS border
© All Rights Reserved
July 28, 2017
Scanned print
Voigtländer Perkeo 1 with shoe mounted uncoupled rangefinder, Vaskar 80mm/f4.5
Fomapan 400 @iso320, developed in Tetenal Ultrafin Liquid 1+19, 15 min @ 20°C
Fomabrom Variant 111 (18x24cm) in Paterson Acugrade FX-31
Untoned
Tags: meoptaopemus5
© All Rights Reserved
Lobotype on HPR.
Dig neg from summer of 2019.
Lobotype sensitizer: Ammonium Iron Oxalate 40% + Silver Nitrate 10% (1+1), about 20 drops of each to cover a 8x10" print.
Developed in slightly acidified tap water (citric acid) and cleared in Citric Acid 1%.
Prefix toned in fresh Thiourea-Gold (Clerc), fixed in Adofix P 1+1 and treated in HCA 1%.
PS outer white border.
I'm finally getting somewhere with my Lobotypes concerning optimal UV-blocking colour on the dig neg (important for contrast) and exposure time :-).
Again thanks for invaluable PS curves and coating info, Wolfgang!
© All Rights Reserved