This was the 3rd film developed, and 2nd 120 film. After great success with the initial 35mm roll devleoped I tried a roll of 120, i'd not really looked at the design of the spool reels and thought as long as around centre spindle so fitted in tank would be ok, I tried to widen te spool to fit 120 film and in the dark in feel in half.. thinking it would be ok i just slotted the film over the centre, clipped together put in tank and developed as below. I opened the developed film to find only the outer 2inch devloped and the rest stuck together and not developed at all. Gutted but a good lesson learn. Skipping dinner I got back to it, realised how the spools feed correctly and loaded a second roll of 120. Here is the result.
ARAX CM + Sonnar 180/2.8 + Extension tube
120 Tri-X 400@800
Xtol 1:3 & Rodinal 1:100
20 Deg
17mins (I guessed as developing in no mans land!)(basing times on a mix of other process times by others on Flickr, but with them using different brews)
Scanned on v600 - default settings
SOOF/S = Straight Off Of Film & Scanner! :) (As near to digital SOOC as can get) + tag/resize
See updates and follow my progress by liking my
Facebook page